Thursday, August 22, 2013

Books! Real books printed on paper. I had forgotten...

I love my Kindle.  I really, really love my Kindle.  And the fact that it syncs with my phone and tablet and I can pick up on my reading on any of them and not lose my place.     love, love, love

In fact, of the thousands (yes, no kidding) of books that used to live with me, most are long gone.  Three categories remain:  classic mysteries (in case civilization fails, I will still have something to read), Arthuriana, and useful-in-the-studio books.  Design and process mostly.

All the following books are in my own library.  All are great in their own various ways.  All the links take you to, which does not pay me to do this.  My financial relationship with amazon is that a lot of my money flows through them to various vendors.

Celtic Designs: An Arts And Crafts Source Book.  By David James.

The decal design for the Domestic (see previous posts) will feature Celtic knotwork type designs, and I am ready to begin that part of the process.  So I went down to the studio and rounded up my Celtic design books.  And immediately became very, very happy.

Celtic Stained Glass Coloring Book.  By Courtney Davis.

Initially I thought I would find designs online, but the process was just not fun.  The minute I had an actual book in my hands I was happy and excited.

Celtic Borders & Decoration.  By Courtney Davis.

Nice to remember the thrill of books.  Not giving up the Kindle, though.  For a straight read, it is just the content that matters, not the delivery system.  But for looking at pictures and trying to find one I want, give me a book.  On paper.  That I can put sticky notes on.


Celtic Design. The Dragon And The Griffin:  The Viking Impact.  By Aidan Meehan.

My favorite of all these books, not only because it was a gift from a DD, but because she knew that this would ring SEVERAL of my chimes: art, history, history of art, geography, geography of art.  Not to mention those fabulous Celts and Vikings.  And did I mention dragons?

And now we draw a modest veil over the further proceedings.  Was a scanner implicated?  Were the copyright laws violated?  If you publish a book of designs for artists and crafters, should you not expect that they would blatantly, literally copy them?  Rather than just provide a "source of inspiration" as this book says.

Great Book Of Celtic Patterns:The Ultimate Design Sourcebook for Artists and Crafters.  By Lora S. Irish.

Actually, that last book (terrific book, btw) just did not work for my nefarious plans.  The weight or thickness of the lines in the drawings was too light.  Absolutely great for illustrating the structure of all those tortured Celtic knot animals, but too thin to show up as a nice design element on a sewing machine.  If you're using a scanner.  Which I am not admitting to.

The Ridiculous Economics of Hobbies

or, what I did on my summer stay-cation.

No photos in this post.  Shhh, the whole project is secret.  No one but me will see it until it is finished.

Earlier this summer I bought a very sad and pitiful Domestic High Arm Fiddlebase treadle.  It was $35 on CraigsList and I didn't even try to offer less.  I love to meet sellers who are realistic about the value of old machines.  This lady had several old machines and was quite knowledgeable about them.  She does some kind of re-enactments or ren faires or something (hey, it was more than 2 minutes ago, you don't seriously expect me to remember, do you?).  And she uses antique machines to sew those costumes.

I had been looking for some kind of machine to do experiments on.  Something with relatively no value.  Now, I would not give a hoot if some politically-correct purist called me out for 'tampering' with history.  But I do have my own set of values about this stuff, and usually I do the minimum amount to get a machine clean and running.  But I wanted one I could do ANYTHING to without feeling guilty.  This is that machine.

The big reveal will come later, when I have finished transforming it into a work of wondrous beauty.  But while you are sitting on the edge of your seat waiting, I thought I would share with you the ridiculous economics of this hobby.

Disclaimer:  prices rounded off.  If I didn't remember what I paid, and I usually did not, I looked it up on Amazon.   This economic analysis is for your amusement only, it is not IRS-ready.  My sister in law (bookkeeper and studying to be an accountant) will certainly laugh at my reasoning below.

Here they are, in the order I remembered them. And I almost certainly forgot some things.

$35.00     Machine, cabinet, treadle
$ 4.00      Formula 409, quart bottle. I used it all on the treadle irons.
$ 8.00      0000 steel wool, two packages.  used a lot, probably as much as two packages.
$ 5.00      Denatured alcohol, gallon, cost about $20.  I may have used a quart of it, and will certainly use the rest on other projects, so I am listing this one as $5.00
Free         Old toothbrushes, old rags
$ 3.00      Paper towels, the heavy duty blue shop towels.  Those thing are awesome.  At least one roll.
$ 1.00      Q-tips, the cheap ones from the dollar store.  The cheap ones are actually better because they are less fuzzy.  May have used half the pack.
$15.00     Paint, one quart of Rustoleum hammered black.  This had been sitting in my workshop, unopened, for YEARS.  May have used as much as one cup of the quart.  Not planning to paint treadle irons again, though, so I am listing the full price.
$15.00     Paint, one quart of Rustoleum hammered copper, bought new.  Used a few tablespoons of it.  Have no future plans for it, so this one and the black are listed here at their full price.
$19.00     Xylol, one gallon, to thin or clean up after the hammered Rustoleum.  A gallon was all they had.  Used a few tablespoons.  Yes, this IS the most ridiculous thing on the list---but I absolutely had to have it, and I absolutely had to have it on the day I bought it, so no shopping around.
$ 6.00      Sharpie gold metallic paint marker.  Used the whole thing.
$ 4.00      A set of six detail paint brushes.  Blew through 4 of them BEFORE I got my hands on the xylol, so those turned out to be disposables.
$ 2.00     Two cheap 1" paint brushes.  See above.
$11.00     Wood bleach, 12 oz.  Only used a bit and will probably never use it again.  More on this later when I describe the project.
$ 1.00       Latex disposable gloves.  Price based on a portion of a box.  I like the ones with powder inside.
$10.00      Clear coat spray paint.
$ 6.00       Decal setting solution.
$17.00      DIY decal sheets, ten.  I haven't done the decals yet, so I don't know how much of this or the clear coat I will use.  Probably at least two of the decal sheets, though.  Whether I ever use the rest of them depends on how well this project turns out.
$10.00     Wood stain, 2 cans, dark and medium.  Did not work out well, but I might use them for other projects in the future.
$ 2.00     Tung oil, quart, $17.00 but enough for several projects.  So I just guessed at the $2 number.  I liked it a lot when I used it on my Davis NVF, not so much on this project.  So the future of the rest of this quart is uncertain.
$ 5.00      Sandpaper
$ 6.00      Knobs, metal, three.  Actually I have no memory of what I paid for them.
$11.00     Sewing machine needles, three.  Yes, it takes obscure and obsolete needles.  Of course.

$196 total.  mwahahahaha.   Is this now what the machine is "worth"?   MWAHAHAHAHA.

How about adding in the labor?  I have a general idea of the time I spent (and will spend to finish), and it is somewhere between 100 and 150 hours.  No kidding.

Let's be conservative and say 100 hours.  My time (and yours, and everyone else's) is worth $25/hour at a minimum.  The guy who mows my yard charges more than this.  Are you worth less?  No.

$196 + (100 hours x $25) = $2696.  Yeah.  Right.

So what is the REAL economic story here?  For less than $200 I amused myself no end for over 100 hours.  I have lots of chemicals and supplies left over for future projects.  I will have an amazing sewing machine like no other at the end of the project.  It will be worth $35.  It might even sew.  I don't know, I haven't tried yet.

Yes, you heard that right. I have not tested it yet. I started dis-assembling it for cleaning and painting before those precious antique needles arrived.  The point of this project was the experimentation, not the end product.

Are you anxious to see that final product now?  So am I.  One more coat of paint and then the decal creation and application to go.

I don't usually spend 100+ hours on a machine, but this summer has been a b.  You can spell the rest of it for yourself.  And I am not talking about the weather.

There are many of us who use craft and hobbies to distract ourselves from the unpleasant realities of life.  If you are also one of those people, please know that you are not alone.  If you are feeling alone, start a blog.  You might be amazed at where it will lead you.

Sunday, August 11, 2013

Domestic High Arm: Handwheel Conundrum

Back again with more questions for the cognoscenti about my Domestic High Arm Fiddlebase.

This time, I am stumped by the handwheel.  I am trying to remove it for a thorough cleaning.  On this
Domestic the treadle belt track is on a separate wheel behind the outer handwheel.  Neither one is coming off at the moment.

The normal thing to do would be to remove the clutch knob, right?  Well, this clutch knob is not budging.

the green one SHOULD say "pin on the clutch knob" rather than "clutch know"

Problem is, there are two pins, one on the handwheel and one on the clutch knob.  When you turn the clutch knob to the left, as you would normally do to remove it, the handwheel pin is in the way of the clutch knob pin and will not let you unscrew the clutch knob.

When you rotate the clutch knob to the right, they move apart from one another and this is also the motion to lock the handwheel to the treadle belt wheel so that they move in unison. 

I thought maybe I had it figured out when I found a screw in the handwheel and removed it.  But that changed nothing.  Both wheel spin fairly freely, but they are not coming off of the shaft.  I have looked for additional screws but found none.

Help!  Anyone?  I've done the usual with Liquid Wrench, heat from a blow dryer, etc.  Nothing changes.  Do I need the brute force method?  Whack it with a large hammer?  It is not budging in the slightest way at the moment--no wiggle to it at all.

Unrelated to the problem, but interesting:  there is a date visible on the inner (or machine-facing) edge of the treadle belt wheel.  Frustratingly, the year is not visible.

Does anyone have something similar?  Does yours also say Oct. 15th?  Does it have a year?

Any information gratefully received.  thanks in advance!