Monday, October 26, 2015

Paint-Along, Anyone?


I'm planning to paint a sewing machine soon, using the simplest and easiest techniques I know.

  • Begin with a functioning machine.  This will not be a repair class.
  • Take off exterior bits (slide plates, tensioner, bobbin winder)
  • Thoroughly clean and lightly sand exterior
  • Mask off openings
  • Paint with hammered Rustoleum or Hammerite paint
  • Make and apply your own decals with an ink jet printer (or buy a set)
  • Clear coat
  • Reassemble the exterior bits
Would anyone like to join me in a paint-along?  I would post instructions week by week.  You COULD follow along anonymously, but what I am really looking for is a smal group willing to more-or-less keep up AND send me digital pictures of their work each week.  I estimate a time commitment of about 5 hours a week.

Yes, I do know that this is a busy time of year.  I'm recovering from knee replacement surgery and I'm looking for a project to keep me sane.

You will probably end up spending about $100, but you will have lots of stuff left over, enough to paint and decal several more machines.  You will spend even more if you buy ready made decals. (See eBay).

So, whaddya think?  Reply in the comments below.  If you want to do it later on, tell me that too.  I'll be starting on my machine soon-ish, but we could postpone the paint along until later.

28 comments:

  1. Weee!!! Soonish works for me. Thanks for doing this Cheryl.

    ReplyDelete
  2. Your work is beautiful, but I just can't bear to paint a machine. Like I just can't color my hair even though it is mostly white- I don't have anything against it, I just can't bring myself to do it. I hope you photo document it so I can follow along. Hope the knee gets better and real strong.

    ReplyDelete
  3. I don't have a candidate for repaint. I do have a 201-2 that needs rewiring. Actually, since the shellac is flaking off maybe it would be a candidate for re paint.

    ReplyDelete
  4. Would love to join a paint-along. I have to finish a king size quilt first then I can get started. This is such a great idea.

    ReplyDelete
  5. I've a friend with a Minnesota Model C that has 2/3 of its paint. Too much rust inside to work. The chrome is also badly rusted. But she uses it to designate the sewing area of her book store. Sooo I am thinking it might be a candidate. Can I send you a photo somehow? Thanks

    ReplyDelete
    Replies
    1. Can you attach photos to an email and send it to me at cherylwarren27278@gmail.com? I could not reply to you directly, which means your blogger settings are set to "no response".

      Delete
  6. I would love too but have to locate a machine for painting. I will be following along

    ReplyDelete
  7. I have a 201-2 that is in very rough shape. I'm in.

    ReplyDelete
  8. Yes ma'am!! I've already got mine picked out! I'll go to HD tomorrow and choose my color :)) This is going to be sew much fun! Amie in TN

    ReplyDelete
  9. I cannot work on this until Spring because of our cold Minnesota weather. I have to do all sanding and painting outside in Spring and Summer. But I will watch and listen and share when I can.

    ReplyDelete
  10. I'm in Cheryl. I have a Husqvarna 12 that is just sad and needs freshening up. It has nice simple lines so won't be too frightening for me. I'll look for the light green Hammerite. Not sure how to post pics to your blog page, can I email to you?

    ReplyDelete
  11. Oh wow, I would love to join in! I have an abused little FW that would be ideal for this :)

    ReplyDelete
    Replies
    1. My plan is not to judge anyone's choices, BUT....I personally won't be doing my two raggedy Featherweights using the methods I will be demonstrating here. They just have too much value, and I think they deserve a finish closer to an automotive finish. I hope to build my skills some more before tackling the Featherweights, and then to use automotive paint rather than the more forgiving textured hammered paint.

      Delete
    2. I totally know what you're saying and I agree! I am hoping to be able to do a proper automotive level job. Let's see if I can get my ducks in a row! With the kids busy with exams and the DH travelling all over (work-related), I hope to be able to make some progress :)

      Delete
    3. So are you still thinking of the Featherweight? Let me stress that you are not going to learn those automotive level skills in the paint along. This one is strictly entry level.

      Delete
    4. No :) I will scratch in my machine stash for a more appropriate fixer upper.

      Delete
  12. I'm in Cheryl!! Just what I need to get going on a customer's machine I'm hesitating to start.
    I believe it is a Minnesota A with peeling paint and an ugly red primer underneath. Have to dig it out of the box under my repair table. Thank you and happy to start and share photos of progress anytime you are. What a gift you are giving us! Hugs, Allison in Plano, TX

    ReplyDelete
  13. Ooooh! I love your work. I have an ugly brown Singer 185 which might be a good candidate!

    ReplyDelete
  14. Ooooh! I love your work. I have an ugly brown Singer 185 which might be a good candidate!

    ReplyDelete
  15. I have a couple of machines that this would be good for, but, no time until after Christmas (trying to get the house ready for company and some events here in early Dec). Hope your knee heals quickly. If you post, it would be great as tutorials for future projects we want to do.

    ReplyDelete
  16. Yes, I have one already taken apart and sanded. .

    ReplyDelete
    Replies
    1. You are well ahead of the curve then. Thanks for joining in!

      Delete
  17. I have at least three candidates, maybe four. There is the Davis VF I bought from a man in Eagar, AZ, who had soaked it in a bucket of kerosene for several months before listing it on CL for $20. There is a Domestic–a cousin to Shield Maiden. Both sew very smoothly. There is an Eldredge Two Spool with sparse, silvered decals. And finally, a tan Singer 221 with good paint but a terrible mouldy odor, and I think a good soak in kerosene and repainting might be the only way to rid it of the smell. Decisions, decisions … :D

    ReplyDelete
  18. Oh man, I am mid-paint on a 301 right now but have a prime candidate for a paint along (99). Can you do a spring paint along also? Please!! I am also bound by the weather :(
    Love your blog

    ReplyDelete
  19. I would love to join in, but I never have the luck in finding these great machines at pleasant prices. Will really enjoy seeing everyone elses progress though.

    ReplyDelete

I want to hear from all of you who want to talk about sewing and sewing machines, so please leave a comment. I will be approving all the posts before they go public. This will weed out all the people who just want to sell you something. Or worse, capture you and use your info for nefarious purposes.